Thank you for using SENCO intelligent water/oil bath. SENCO's high-end rotating evaporator and reactor have been equipped with an intelligent water/oil bath.

Intelligent temperature control can pass the self-adjusting PID parameters to the transition process under the actual working conditions in order to achieve good control performance of plus or minus 0.2 ℃ temperature fluctuation.This performance is far from the ordinary temperature controller(two-position on and off) ). To achieve the best thermostatic effect in use, the following points should be noted:

1. The "display temperature" (red) reaches the "setting temperature" (green). There is a transition process with a gradual reduction in the fluctuation of the water bath, which usually fluctuates between 1 and 2 times, and the third wave tends to be stable.Oil bath fluctuation 3 ~ 4 times, the 5th wave tends to stabilize.Plus or minus 0.2 ℃ volatility refers to stable after reading.

2. The self-tuning parameters are sampled at a specific working condition. The operating conditions of the machine are as follows:

Temperature control range of heat medium capacity setting value load environment.

50 ~ 70% 70 ℃ 150 ℃ or less water at room temperature, the wind

130 ℃ 180 ℃ heat conduction silicone oil 50 ~ 70% or higher at room temperature, the wind