Products

Chemical Diaphragm Pump  (ME 4C)

Pdt. Code:ME 4C

7kPa (70mbar / 52Torr), 65L/min, with gas ballast valve,  Anti-corrosive.  Product dealt by SENCO.

  • Pdt. Name/Model: Chemical Diaphragm Pump(ME 4C)
  • Pdt. Code: ME 4C
  • Pdt. Features:

Chemical Diaphragm Pump                                                                                                                                   
The Chemical Diaphragm Pump is a dry running vacuum pump which completely solves the chemical corrosion problem of vacuum pump.It is particularly suitable for situations where chemical corrosion is required or prolonged uninterrupted operation is required.All the parts in contact with the gas were treated with teflon (PTFE) and reinforced with carbon fiber, which completely guaranteed the chemical corrosion resistance of the pump.The diaphragm uses a sandwich structure, or multilayer structure, to increase the toughness and strength of the diaphragm.Diaphragm pump is an advanced product of international vacuum pump development and is widely used in China.
 
The main advantages of diaphragm pump are:                                                                                                   
· vacuum stabilization and easy to control.
· complete resistance to chemical corrosion.
· no water consumption, strong environmental protection performance.
· small size and light weight.
· easy to use and clean.
· sustainable and stable work.
· Maintenance and repair are very convenient.
 

The user instructions                                                                                                                                              

When selecting the vacuum pump, the correct selection of the vacuum pump directly affects the service life of the vacuum pump and the benefit of the enterprise.

In practice, it is shown that in the same working condition, whether the selection is correct or not, the service life of the vacuum pump is several times, tens or even hundreds of times. Therefore, we are reminded that:

One、 whichever vacuum pump is chosen, can refer to the sample.Professional technical staff can also be recommended to obtain satisfactory results.

Two If we are required to assist in the selection, please provide the following information:

1. Vacuum degree of work;

2. Pumping time when working vacuum degree;

3. The volume of vacuum system (or vacuum tank);

4. The name, temperature and concentration of the pumped gas medium;

5. Flammable, explosive and poisonous gases and their ph;

6. Whether the gas discharged by the pump needs to be recycled;

7. The shaft seal of the vacuum pump, and the special requirements of the motor and other parts.

 

Pressure unit conversion table                                                                                                                             

 

SPECIFICATIONS

1 Fit for Rotary Evaporator 10-50L
2 Ultimate Vacuum Rate 7kPa (70mbar / 52Torr)
3 Max Pumping Speed 65L/min
4 Rated Power 180W 220V
5 Dimensions (cm) 26x24x20H
6 Features Lower vacuum rate but with faster pumping speed, anti-corrosion, little maintenance job, not for pumping of gas with powder or grain
7 Remarks The models are dealt by Senco, made in Germany.

CONFIGURATIONS

Symbol Instruction: / - None,  ● - Equipped,  ○ - Optional ( * - Only available when ordering of product, not for separate sale)

Note: Some specifications of relevant or customized models have some differences from that of standard model, for details, please consult with us.

  • Vacuum Controller(VC100C)

    Measure Range 0-105.0kPa, Resolution 0.1kPa, Set Range 2~90kPa,  digital vacuum rate display. 
    PTFE electromagnetic valve & buffer bottle & filter bottle are equipped.
     
     
     

     

  • Promotion: